Exiting Maintenance Mode “end of header not found”

While running through a large vSAN cluster upgrade project recently i ran into the occasional issue where hosts would fail to exit maintenance mode following an upgrade from ESXi 6.7U3 to 7.0. The error seen was “A general system error occurred: end of header not found” This is caused by unused entries in the hostd

 273 total views

Upgrade your VCSA from 6.7U3 to 7 – Part 2

This is part 2 of my “Upgrade your VCSA” instructions, to see part 1 click HERE 1.Click “Continue” to move onto the next stage 2. Stage 2 show now be highlighted, click Next 3. Select what data you need to migrate and upgrade. Copying performance metrics etc is optional. 4. Confirm all the details are

 625 total views

Upgrade your VCSA from 6.7U3 to 7 – Part 1

There’s no shortage of posts out there explaining how to upgrade your vCenter but seeing as I was upgrading from 6.7U3 to the recently launched 7, I thought I would run through the steps with you all. Note: Before you start the upgrade, please ensure you have done your due diligence and checked the VMware

 706 total views,  1 views today

vExpert 2020

It is with great pleasure that i can announce i have been selected in this years vExpert Program. Over the past 18 months i have tried to increase my engagement in the vCommunity by writing new blog posts, engaging on Twitter/LinkedIn and by assisting on the VMTN forums where possible. Going forward im going to

 593 total views,  1 views today